Q8 Log Oil

q8-colors.png
q8-colors.png
sale

Q8 Log Oil

from 69.00

OutlastTM Q8 Log Oil is an EPA registered exterior wood preservative specifically designed to control decay causing organisms(and mold, termites, powder post beetles) in log homes and on wood siding.   It provides unsurpassed water repellency and sheer trans-oxide color with one coat coverage.  Q8 Log Oil is a totally non-film forming EXTERIOR treatment that will never crack or peel.  The trans-oxide pigment system provides excellent UV control that operates like a sunscreen to slow down graying of the wood and provide fade resistant color.  The solution soaks into the wood to provide protection, not just on the surface, but also deep into the wood cell structure.Q8 Log Oil offers unique flexibility in terms of application temperature ranges; log moisture content and delivery method. Q8 Log Oil meets all nationwide VOC requirements.

Protects

  • Penetrating Sealer that goes deep into the wood to protect, Will not flake, chip, or crack

  • Registered wood preservative to prevent mold, termites, and powder post beetles from destroying the wood
  • Pigments to protect from graying
  • Superior Water Repellent
  • Copper 8  in Q8 Log Oilis toxic to termites and powder post beetles that yet approved for incidental contact with food such as picnic tables and produce bins.
  • To prevent boring insects such as carpenter bees, carpenter ants, lady bugs, dirt daubers, etc. that do not eat wood use NBS 30 that can be mixed together with Q8 Log Oil

Preparation

  • Remove mill dust, dirt, mildew, and anything else from the surface
  • Use KleenStart to clean the Surface.
  • Test the Color. (Full color and curing takes up to two weeks)
  • Colors are Semi-transparent 

Application

  • Thoroughly mix Q8 Log Oil so that the pigments are suspended in the solution
  • Use a brush, roller or Pump Up Garden Sprayer to apply the oil 

  • Use a pump up sprayer with a noncorrosive tip (brass tips not recommended)

  • Apply as much liquid as the wood will absorb
  • Not necessary to "keep a wet edge"

Consideration

  • If applied below 50 degree Fahrenheit Q8 log oil can be to thick to use a sprayer. Use a brush or roller instead.
  • Streaking of pigments can occur if it rains within 36 hrs of application. Respray the effected area and let it sit for 15 minutes then smooth out any streaks with a paint brush.
  • Always Review Safety Information before and Safety Data Sheets before opening  and using any sealer

Maintenance

  • After the initial coat, reapply in 2 years.
  • Subsequent coats should be applied  every 8 years.

 

 

Color:
Size:
Quantity:
Add To Cart

Protects

  • Penetrating Sealer that goes deep into the wood to protect, Will not flake, chip, or crack

  • Registered wood preservative to prevent mold, termites, and powder post beetles from destroying the wood
  • Pigments to protect from graying
  • Superior Water Repellent
  • Copper 8  in Q8 Log Oilis toxic to termites and powder post beetles that yet approved for incidental contact with food such as picnic tables and produce bins.
  • To prevent boring insects such as carpenter bees, carpenter ants, lady bugs, dirt daubers, etc. that do not eat wood use NBS 30 that can be mixed together with Q8 Log Oil

Preparation

  • Remove mill dust, dirt, mildew, and anything else from the surface
  • Use KleenStart to clean the Surface.
  • Test the Color. (Full color and curing takes up to two weeks)
  • Colors are Semi-transparent 

Application

  • Thoroughly mix Q8 Log Oil so that the pigments are suspended in the solution
  • Use a brush, roller or Pump Up Garden Sprayer to apply the oil 

  • Use a pump up sprayer with a noncorrosive tip (brass tips not recommended)

  • Apply as much liquid as the wood will absorb
  • Not necessary to "keep a wet edge"

Consideration

  • If applied below 50 degree Fahrenheit Q8 log oil can be to thick to use a sprayer. Use a brush or roller instead.
  • Streaking of pigments can occur if it rains within 36 hrs of application. Respray the effected area and let it sit for 15 minutes then smooth out any streaks with a paint brush.
  • Always Review Safety Information before and Safety Data Sheets before opening  and using any sealer

Maintenance

  • After the initial coat, reapply in 2 years.
  • Subsequent coats should be applied  every 8 years.

 

Consideration

  • If applied below 50 degree Fahrenheit Q8 log oil can be to thick to use a sprayer. Use a brush or roller instead.
  • Streaking of pigments can occur if it rains within 36 hrs of application. Respray the effected area and let it sit for 15 minutes then smooth out any streaks with a paint brush.
  • Always Review Safety Information before and Safety Data Sheets before opening  and using any sealer