• Especially fast drying and curing
  • Extremely durable and hard-wearing
  • Water and dirt resistant
  • Attractive color tones, transparent or intensive
  • Specifically for commercial use
  • Suitable for all woods including exotic woods
  • Resistant to common spills such as water, juice, tea, soda and wine
  • Resistant to saliva and perspiration, suitable for children's toys
  • Microporous and breathable; finish will not crack, peel or flake
  • Easily spot repairable


Osmo Oil Stain is ideal as a colored base coat for unfinished wood, OSB, and cork.



Approximate coverage: 250-525 ft2/L with one coat Number of coats: 1 or 2 coats (depending on desired intensity)
Application temperature: +40℉
Drying time: 12hrs
Sizes: 1L



  1. Finished surface in 2-3 days, 2-3 coats (1st/2nd Oil Stain, 2nd/3rd clear Polyx®-Oil)

    Transparent color:
  2. Apply very thinly to the clean and dry wood along the wood grain with Osmo Floor Brush, Microfibre Roller or Scraper.
  3. Most brushstrokes can be removed within 30 minutes after applying.
  4. Rub into the wood evenly with a white pad.
  5. Drying time approx. 12 hours (normal climatic conditions, 72℉/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
  6. Intensive color:
  7. Apply the first coat as described in points 1-4.
  8. Apply the second coat, also very thinly, as described in point 1.
  9. Rub into the wood evenly with a white pad.
  10. Drying time approximately 12 hours, see point 4.
  11. After step 4 or 8, carry out the final top coat with a clear Osmo Polyx®-Oil and allow to dry.
  12. Note: Oil Stain can also be applied to smaller surfaces with a lint-free cloth.

Tools, Maintenance, and Care

follenwood in Walnut Grove, MS on Houzz